SumoSprings Solo Custom Helper Springs - Rear Axle
(2272 reviews)
Price: $342.99
In Stock
SumoSprings Solo Custom Helper Springs - Rear Axle
Item # SSR-338-47
Our Price: $342.99
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2272)
- Q & A (0)
- Photos
SuperSprings Intl Vehicle Suspension - SSR-338-47
- Jounce-Style Springs
- Rear Axle Suspension Enhancement
- Light Duty
- SuperSprings Intl
900-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Features:
- Helper springs upgrade your vehicle's rear suspension for improved driver control and comfort
- Keep your vehicle level when you're towing or hauling a heavy load
- Help to absorb bumps and shocks
- Minimize sway
- Progressive load control - springs compress according to the weight of your cargo
- Lighter loads - springs compress easily at first for soft engagement and a less bumpy ride
- Heavier loads - springs compress by as much as 80 percent for support
- Springs work independently from each other to compensate for off-center loads and reduce body roll during sharp turns
- Durable microcellular urethane
- Works in temperatures from -25 F to 200 F
- Resists damage caused by oils, road salts, and UV rays
- Minimal lateral expansion - springs compress vertically instead of to the sides so they aren't easily damaged when operating in tight spaces
- Maintenance-free - no tubing to run or air pressure to monitor like with air springs
- Simple, no-drill installation
- 2 Jounce-style springs included
- Made in the USA
Specs:
- Weight capacity (at 50-percent compression): 900 lbs
- SumoSprings will not increase your vehicle's weight-carrying capacity
- Limited lifetime warranty
- 30-Day satisfaction guarantee
Rear Suspension Support
Towing or hauling a heavy load can cause rear sag as your factory suspension compresses under the weight of the load. This means that the rear axle is trying to support not only the extra load but also the weight of your vehicle. And because there is less weight on your front axle, your front tires make less contact with the road, which causes problems with traction, steering, and braking. SumoSprings upgrade your vehicle's factory suspension to level your vehicle, improve driving performance, and keep your ride comfortable.
SumoSprings provide progressive load control - the more you load them, the stiffer they become. With a lighter load, the springs will compress easily for soft engagement and a less bumpy ride. The closed-cell urethane material allows for smooth contact between the springs and your vehicle. And the springs act like a shock absorber to dampen road vibration.
The springs can also compress by as much as 80 percent to support a heavy rear load and to help your factory suspension bear up under the load. This evens out the weight, which levels your vehicle and ensures that your front tires are making better contact with the road. A level ride means that you have improved driving control, ensures safe headlight aim, and helps to minimize sway. The springs also support your factory suspension, which helps prevent sagging and reduces bottoming out.
The springs work independently from one another to support each side of your vehicle. This action helps to reduce body roll when you make a sharp turn. This also helps compensate for an off-center load.
Durable, Custom-Fit Springs
These microcellular urethane springs are tough. They resist abrasion, oil, salt, and UV rays that can more quickly wear out other springs, and they perform well in temperatures ranging from -25 F to 200 F (-33 C to 93 C).
SumoSprings compress vertically with minimum expansion to the sides, so they won't be damaged by nearby mechanical parts and they fit safely into tighter spots. And unlike air springs, SumoSprings require no maintenance or adjustment.
The helper springs are custom designed to fit your vehicle, and they install easily - no drilling required.
SSR-338-47 SuperSprings Sumo Springs Solo Rear Vehicle Suspension Kit for Vans
Replaces SSR-335-47
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2010 Winnebago Chalet Motorhome 24VR
- 2011 - 2012 Thor Chateau Citation Sprinter Motorhome 24SA
- 2011 - 2011 Thor Chateau Citation Sprinter Motorhome 24SB
- 2011 - 2012 Thor Chateau Motorhome 23S
- 2019 - 2021 Thor Chateau Sprinter Motorhome 24BL
- 2019 - 2021 Thor Chateau Sprinter Motorhome 24DS
- 2017 - 2018 Thor Chateau Sprinter Motorhome 24FS
- 2017 - 2018 Thor Chateau Sprinter Motorhome 24HL
- 2018 - 2019 Thor Chateau Sprinter Motorhome 24WS
- 2019 - 2020 Thor Citation Sprinter Motorhome 24MB
- 2013 - 2017 Thor Citation Sprinter Motorhome 24SA
- 2018 - 2019 Thor Citation Sprinter Motorhome 24SJ
- 2019 - 2020 Thor Citation Sprinter Motorhome 24SK
- 2015 - 2016 Thor Citation Sprinter Motorhome 24SL
- 2013 - 2018 Thor Citation Sprinter Motorhome 24SR
- 2016 - 2020 Thor Citation Sprinter Motorhome 24SS
- 2014 - 2020 Thor Citation Sprinter Motorhome 24ST
- 2017 - 2018 Thor Citation Sprinter Motorhome 24SV
- 2021 - 2021 Thor Coleman Motorhome 24EQ
- 2018 - 2019 Thor Compass Motorhome 24LP
- 2019 - 2020 Thor Compass Motorhome 24SX
- 2018 - 2020 Thor Compass Motorhome 24TF
- 2017 - 2018 Thor Compass Motorhome 24TX
- 2008 - 2009 Gulf Stream Conquest BT Cruiser Motorhome 5232
- 2008 - 2009 Gulf Stream Conquest BT Cruiser Motorhome 5234
- 2008 - 2008 Gulf Stream Conquest Vista Cruiser Mini Motorhome 4230
- 2008 - 2008 Gulf Stream Conquest Vista Cruiser Mini Motorhome 4231
- 2008 - 2008 Gulf Stream Conquest Yellowstone Cruiser MB Motorhome 5232
- 2008 - 2008 Gulf Stream Conquest Yellowstone Cruiser MB Motorhome 5234
- 2021 - 2021 Thor Daybreak Motorhome 24GO See All Vehicle Fits
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
SumoSprings Solo Custom Helper Springs - Rear Axle - SSR-338-47
Average Customer Rating: 4.7 out of 5 stars (2271 Customer Reviews)
900-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.by: Jack 11/15/2023
Mercedes-Benz Sprinter
I added these along with the sumo springs on the front to my Dynamax isata 3 (2021 sprinter chassis). I absolutely love how it took away the sway while driving in wind. Did not effect the quality of the ride just greatly improved the handling.
by: Jim08/26/2022
The SumoSprings Helper springs have too much clearance between the spring and the axle. Probably because I have helper springs on the rear axle which raises the Sprinter somewhat.
by: Paul T08/27/2019
I put Sumo springs on my 2018 Sunseeker 2400 WS with the MB chassis. They made a huge difference in stability and ride. No more rocking side to side also eliminating a slite shimmy at 65mph. I installed both front and rear,easy to do yourself.
by: Mike08/06/2020
Installation was quite easy, the hardest part I had was finding the sweet spot to get the second one started! The first one went in just like the video showed. It took me about 45 minutes to 1 hour to put these in and some of that time was going to get tools.
by: Downeast04/11/2023
Mercedes-Benz
This set tightened up the suspension on my Mercedes motor home. Cornering is much better which helps the overall handling. I also replaced the sway bar.
by: Lou 04/07/2023
Quality product, great upgrade for the stock part. Installation video was spot on. Took less than 30 minutes to complete. Jamie was very helpful in determining the correct part and completing the order.
by: Sailorman7610/05/2019
Easy to replace existing bumpstops by using the jack of my 2015 Winnebago View to elevate each side (with safety jackstands). Take a large screwdriver to pry existing unit out. New unit easily slides innand seats properly. When coupled with matching SumoSprings for the front, the ride stability and quality is enhanced significantly! Well worth the investment!
by: Brian 08/29/2023
easy install. definitely helped with the sway issues.
by: Paul11/29/2018
2017 Winnebago View Motorhome
I installed the rear sumo springs (with a little difficulty ) and test drove my 2017 Winnebago View and just adding the rears helped alot with reducing leaning on slow speed turns.
Will install front Sumos when I get a chance. Little room to work, access to to the nut is challenging.
etrailer delivered everything early and in perfect condition
Paul
11/30/2019
The rig handles much better with the Sumo Springs , particularly on city streets. It corners sharply without the massive body roll and turning into sloped driveways , the rolling is greatly reduced. Very happy I added these to my Sprinter Chassis.
by: Andre11/01/2018
2010 Mercedes-Benz Sprinter
Installed the black sumo only 2 wekks ago.Should have done that right after reception last year. Reduce sway totally when i leave my yard(3 inches bump). Don,t need stabilizator,floor is very solid and stable. On the road test for only 10 miles, there is a much better stability. I already have yellow sumo on front suspension where suspension was weak and direction instable.those problems have disapeared. Very satisfied client.
07 view sprinter 2006
Mike L.
11/2/2018
We are glad to hear that the new SumoSprings you purchased are working well for you. Please keep in mind that suspension enhancement products like these are intended for use on suspension systems that are in good working order.
by: John C03/25/2020
Mercedes-Benz Sprinter
2017 Winnebago View 24G Sprinter Chassis: The rear Sumo Springs definitely reduced the tendency of the stock suspension of bottoming out on bumps & pot holes and was way less expensive and simpler than installing an airbag suspension kit.
by: Adventurer07/20/2018
Mercedes-Benz Sprinter
I have a 3500 Sprinter RV. Had the SumoSprings installed front and back for $135 at an independent RV service center that also handles RV's. They had never installed them before. I gave them the installation instructions and some advice I learned from some online videos. Sprinter is unloaded at present but notice it handles better going around turns and curves in that it doesn't lean as much and feels very stable. Need to take on a trip to see how it handles when loaded. I noticed a sort of squeakiness I am not sure was there before. I need to drive it more to determine it is from the SumoSprings.
by: Edgar 10/22/2021
Mercedes-Benz Sprinter
I originally purchased these to use as a overload system for a motorcycle carrier on my class B sprinter van. What I quickly realized was a tremendous change in the stability of the vehicle in turns and crosswinds which the SumoSprings provided. I have already recommended them to several friends and sprinter owners I have met on the road. These were fairly easy to install taking about 20 minutes to install per side. Thanks
by: Thomas H.06/05/2015
Received shipment promptly- as usual with E Trailer. Removal of old bumper took 8 sec. each with a small pry. I jacked the frame up approx. 2 inches to allow for the clearance required by the new SumoSprings. I used a 6 ton bottle jack and a large wooden block. The rear wheels stayed in contact with the ground. The "springs slide into place as per the instructions. I used a wide blunt chisel to push them into place. Total time including collecting tools, taking photos, installation and cleanup was 50 mins.
Now the good part- noticed a decrease in buffeting at interstate speeds and a decrease in "floating on "washboard road surfaces.
Movement when stepping into the cabin is now negligible. Great Product!
by: Glenn C.06/21/2018
2015 Mercedes-Benz Sprinter
I installed both the front ( SSF-106-40-47) and rear (SSR-338-47) SumoSpring suspension enhancement devices on my 2015 Winnebago View which is on a Mercedes Benz Sprinter chassis. The vehicle is a bit top heavy and cross winds made the coach sway back and forth as did entering and leaving driveways and cornering on sharp curves. At times, this was scary and I was afraid it would lose control. I had a professional body shop install these for me for a very reasonable price, and upon leaving their shop, I felt the difference immediately. When I saw the original equipment pieces, I thought they were a joke. These new items touch the suspension at all times on the rear and are only 1/2" away from contact on the front. This has been a slightly over $400 investment in driving safety and is worth every cent. I literally said "WOW" out loud as I entered the freeway ramp: minimal sway with a good feeling of control. I highly recommend these devices.
by: Robb 05/29/2018
2016 Mercedes-Benz Sprinter
typical of many installations, the first side took 45 minutes, the second took about 8! I used 4" C clamp to compress the OEM bump stop laterally and that made it very easy to remove. Use LOTS of soap to aid in installation of Sumo Spring into nesting bracket. First impressions are favourable. Sway over curbs in parking lots significantly reduced and unit is much more stable at rest while walking inside. Took it on a short test ride and you can feel the difference but did not have top deal with crosswinds or semis, long term hard to tell. This is a low cost, high value upgrade to my Mercedes Sprinter RV
by: Gordon Smith10/17/2014
2007 Mercedes-Benz Sprinter
08 Winnebago View on an 07 Sprinter chassis. To reduce the side-to-side rocking that is inherent in this tall, narrow, heavy vehicle, I decided to try the Sumo SSR-335-47's on the rear bumpstops. Using the vehicle bottle jack, I raised the rear tires almost off the ground, one side at at time, to provide enough room to fit the Sumos into place. The old bumpstops simply pop out with force from a couple of screwdrivers, and the Sumos simply slide into the existing brackets. The fit is precise and snug. I put soapy water on the brackets and applied a bit of force to wedge the Sumos into place. It's that simple. The difference is pronounced, with significantly less rocking over minor road undulations. I'm impressed with this product, and wish I'd done this simple modification long ago.
by: Tim C12/18/2018
The Sumo Springs significantly reduced the roll in my class B rv. They also assist with reducing the roll impact of wind while at higher speeds. I have suitable jacks and jack stands and these were easy for me to install. There was an on line video on installing them which was helpful.
by: Davis 06/10/2021
Ride quality and stability greatly improved. My wife loves this mod to our RV. And it was simple to installed especially with a hydraulic leveling system already on the RV. Another reason for getting these were for more ground clearance or the leveling pads. Great purchase on many levels.
by: John02/27/2019
2008 Winnebago View Motorhome
I ordered these, hoping they would smooth our ride a little. They arrived today at noon. By 3 PM, they were installed. Test drive was great. The old rubber stops that MB puts on are worthless in my opinion. They don't even come into play until you have hit a pothole or something that forces the shock to compress. As a result, you feel a pretty solid clunk. These Sumo Springs are always in contact with the axle providing support. A much better design.
Installation did require removal of the wheels so I used it as an opportunity to check my rear brake pads. Bonus!
by: Steve O09/15/2015
2015 Mercedes-Benz Sprinter
These Sumo Springs were recommended by a couple of others on an RV forum (3500 Sprinter chassis) I subscribe to. They were shipped and arrived in a timely manner. I had them installed at a local shop today (only took them 15 minutes - I most likely could have done it myself but opted not to). At this point, just driving into and out of a couple of shopping areas, the rear "thrashing about" when one thinks all the glassware is about to come flying out of the cabinets is greatly reduced.
by: Brian Smith03/16/2015
2014 Chevrolet Silverado 3500
I have a 2014 Winnebago View on a Mercedes 3500 chassis. Installed these replacement bump stops along with a Hellwig sway bar. First, they really are as easy to install as the instructions suggest. The most difficult part was figuring out how to get the floor jack high enough.
Second, after these two minor upgrades that took about 2 hours to install, I can not believe how well the coach handles now. Unbelievable improvement for little $$$ and easy installation.
I would recommend to anyone.
etrailer has always been super easy to work with on top of the products, I initially ordered the wrong bump stops (2500), easily exchanged for the proper items.
by: gordon10/21/2016
2013 Mercedes-Benz Sprinter 3500
bumpers act as designed, coupled with front and back sway bars they make up a good correction to the rock and roll of the Mercedes 3500
by: mike m06/30/2015
Mercedes-Benz Sprinter
90-95% improvement road sway, rocking without affecting ride (doesn't feel any rougher) '14 mercedes sprinter 24b solera.
10 min job after jacking, blocking rig.
Easy to remove with rubber mallet.
Slips right back in place.
Definite improvement.
by: Carole08/17/2020
2014 Mercedes-Benz Sprinter
After installing the rear Sumo Springs I purchased from etrailer, I did a test drive and immediately felt an improvement in side-to-side sway. This is a great product and, as usual, etrailer customer support is as good as the products they sell.
25
2180
Show More Reviews
See what our Experts say about this SuperSprings Intl Vehicle Suspension
- How do I Decrease Sagging with the GearSpace 34 on My 2022 Mercedes Sprinter 3500?If you have sagging when using the GearSpace 34 # HGK826 on your 2022 Mercedes Sprinter 3500, the first thing to do is to make sure that you are abiding by the weight capacity of the carrier and the hitch itself. The carrier has a weight capacity of 300 pounds, so it is important to make sure that you are not overloading the carrier. Secondly, it is important that you don't overload the hitch itself. Since the GearSpace 34 weighs 160 pounds, that weight needs to be added to the weight of...
view full answer... - What Front and Rear Helper Springs do You Recommend for My 2022 Mercedes Sprinter 3500? For your 2-wheel drive model Mercedes Sprinter 3500, I recommend these following springs: - SumoSprings Solo Custom Helper Springs - Front Axle # SSF-106-47 - SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-338-47 Both of these SumoSpring models will help absorb bumps and shocks while minimizing sway during transport. The great thing about these springs is that once they are installed on your front and rear axles, they do not require any additional maintenance or upkeep. To...
view full answer... - Sway Bar and Suspension Enhancement Recommendation for 2014 Coachmen Prism 24G The best improvement for RV handling is a larger rear sway bar, which for your 2014 Coachmen Prism 24G the correct part number would be the # RM-1209-120. Sumosprings like the part # SSR-338-47 for the rear and part # SSF-106-47 for the front will also help quite a bit too. Lots of RVers swear by the Sumosprings to help with sway like what you described so these will help quite a bit as well.
view full answer... - How To Improve the Ride on a 2014 Mercedes-Benz Sprinter 3500 ChassisThe SumoSprings Maxim Custom Helper Springs like part # SSR-336-47-1 do indeed offer a better ride quality when compared to the SumoSprings Solo Custom Helper Springs like part # SSR-338-47 which is what I assume you are referring to. However, the SumoSprings Maxim Custom Helper Springs will only work for you if you have the standard axle configuration and not the 2" spacer (see photo). If you do have this spacer which most Sprinters do then you will want to consider the Roadmaster Rear...
view full answer...
- SuperSpringsRear Suspension Enhancement on a 2011 Mercedes-Benz Sprinter 3500Any suspension enhancement that you add to your 2011 Mercedes-Benz Sprinter 3500 wouldn't necessarily add height to your RV, but it would help to keep it level when under a load and would also help create a more comfortable ride. The SumoSprings Maxim Custom Helper Springs # SSR-336-47-1 are a great option to add to your Sprinter for suspension enhancement. They have a 2,200-lb weight capacity at 50% compression (they will not raise the weight capacity of your Sprinter) and they are connected...
view full answer... - Difference Between the Factory and Roadmaster Rear Anti-Sway Bar on a 2019 MCB Sprinter 3500The Roadmaster Rear Anti-Sway Bar part # RM-1209-120 (Cutaway Models) will preform better than the factory rear anti-sway bar on your 2019 Mercedes-Benz Sprinter 3500 because it is thicker (1-3/8") which means it will be stronger therefore helping to further decrease side-to-side movement. The Roadmaster Rear Anti-Sway Bar also comes with polyurethane bushings which will be more durable as well as less noisy than the rubber bushing you have on the factory rear anti-sway bar. If you really...
view full answer...
- Recommended Suspension Enhancement For 2022 Thor Daybreak On 2022 Mercedes-Benz Sprinter 3500 I recommend using the SumoSprings Solo Custom Helper Springs for the Front Axle # SSF-106-47 and the Rear Axle # SSR-338-47. These will help improve ride quality by adding additional support to the factory suspension on your 2022 Mercedes-Benz Sprinter 3500 Chassis. Since the springs are progressive they will also help the shocks to reduce road vibration and shock that can cause damage to the components in your 2022 Thor Daybreak. The Roadmaster Rear Anti-Sway Bar # RM-1209-131 is an...
view full answer... - Will Rear of 2013 Mercedes Sprinter 3500 be Raised With SumoSprings Suspension EnhancementIt is possible the SumoSprings Solo Custom Helper Springs # SSR-338-47 will raise the rear of your 2013 Mercedes Sprinter 3500 about 1/2 inch to an inch when installed, with the reason being they replace your less effective factory bump stop. That slight raise is actually going to be part of the benefit of the SumoSprings because this is what will help keep your Sprinter level, which will help improve your Sprinter's overall handling and stability so you can enjoy the time in your rig. I...
view full answer...
- Comparing SumoSprings Solo Custom Helper Springs for a 2015 Mercedes-Benz SprinterCorrect, the SumoSprings Solo Custom Helper Springs part # SSR-338-47 will have a softer ride than the SumoSprings Solo Custom Helper Springs part # SSR-338-54 as it's made of a softer spring. That said, the latter will also provide more support. They are both fits for a 2015 Mercedes-Benz Sprinter
view full answer... - Recommended Front and Rear SumoSprings for 2018 Mercedez-Benz Sprinter 3500For your 23 foot RV that's built on the 2018 Mercedes-Benz Sprinter 3500 I recommend the 1,000 Pound SumoSprings # SSF-106-47 for the front and the 900 Pound SumoSprings # SSR-338-47 for the rear. This will give you excellent support for a level ride that will allow for much improved stability as you turn corners and travel over mistakes in the road. I have attached a couple short video demonstrations that you can check out as well.
view full answer... - Recommended Suspension Enhancement for 2019 Jayco Melbourne on a 2018 Sprinter 3500 ChassisThe correct Roadmaster anti-sway bar for your 2018 Mercedes-Benz Sprinter 3500 chassis is part # RM-1209-131. This does require some drilling but it also retains (and enhances) your OEM anti-sway bar. You'd actually be pretty surprised at how much adding even just a thicker anti-sway bar can improve the handling of your motorhome. You are definitely looking in the right place when you mention the SumoSprings to help with enhancing your ride as well. I recommend adding SumoSprings # SSR-338-47...
view full answer... - Recommended SumoSprings for 2022 Pleasure-Way Plateau TSFor your 2022 Pleasure-Way Plateau TS I recommend the SumoSprings Solo Custom Helper Springs # SSF-106-40 for the front axle and # SSR-338-47 for the rear axle. Adding these helper springs would be a great choice. The springs will help minimize sway and absorb bumps and shocks without sacrificing the overall ride quality. They also work independently from each other to help compensate for off-center loads. I have attached a review video along with an installation video for your reference.
view full answer... - Recommended SumoSprings For a 2021 Leisure Travel Van on Mercedes-Benz Sprinter 3500 ChassisI recommend using the SumoSprings Solo Custom Helper Springs Front # SSF-106-47 and Rear # SSR-338-54 on your 2021 Leisure Travel Van. Both these are confirmed to fit the 2 wheel drive 2021 Mercedes-Benz Sprinter 3500 chassis under your van. The front are the heavier black(1,000lbs) rating versus the Blue # SSF-106-40 at only 500lbs. The rear is the yellow(1,400lbs) versus the Black # SSR-338-47 at only 900lbs. The higher capacities will give you much better support for the body rocking...
view full answer... - Benefits of Installing Sumo Springs # SSR-338-47 on Motorhome on 2013 Sprinter Cab ChassisAlthough the Sumo Springs # SSR-338-47 can help reduce body roll when the vehicle is under load, the primary benefit is to provide additional support to the rear suspension, and therefore help keep the vehicle level, prevent the rear of the vehicle from sagging and to keep the vehicle from bottoming out when under load. The springs will progressively adjust, as more weight is added, the springs become more stiff. The Sumo Spring is meant to replace the factory bump stop, and the manufacturer...
view full answer... - Correct Rear Sumo Springs for a 2021 Winnebago View on Mercedes-Benz Sprinter VS30 Chassis Yes, the SumoSprings Solo Custom Helper Springs part # SSR-338-47 will fit a 2021 Winnebago View on Mercedes-Benz Sprinter VS30 Chassis.
view full answer... - Sumo Springs SSF-106-47 and SSR-338-54 For 2020 PleasureWay Plateau TSFor your 2020 PleasureWay Plateau TS RV the SumoSprings kit part # SSR-338-47 for the rear and the # SSF-106-40 are going to give you just the right amount of support to improve handling and bottoming out resistance without affecting ride quality so it would be the way to go. If you really want to improve the handling of the RV a rear sway bar upgrade like part # RM-1209-131 would be a really excellent choice. The biggest improvement you can make to the ride quality of a motorhome is a...
view full answer... - SumoSprings and Rear Sway Bar for 2020 Jayco Melbourne For the rear axle of your 2020 Jayco Melbourne you'd want the SumoSprings kit part # SSR-338-47 and then for the front you'd want the part # SSF-106-40. While we don't carry the Helwig brand we do have the Roadmaster rear sway bar kit that fits your motorhome with part # RM-1209-131 which will work extremely well to improve the handling and ride quality of your motorhome.
view full answer... - Method and Ease of Installation of SuperSprings Rear Axle Helper Springs # SSR-338-47SuperSprings recommends that the installation of this product, SuperSprings Vehicle Suspension Helper Springs for the 2013 Mercedes-Benz Sprinter 3500, part # SSR-338-47, be done by a professional or persons with sound mechanical knowledge. Note also that these are intended for use with original factory springs; if aftermarket springs are installed on the vehicle then SuperSprings technical staff should be consulted prior to installation. The Helper Springs can be removed after initial...
view full answer... - Recommended Suspension Enhancement for 2016 Sprinter 3500If you don't presently tow, you can use the Timbren Rear Suspension Enhancement System # TMBRSP35A on your 2016 MB Sprinter 3500 but they may be a little stiff. They will reduce body roll, but they make the ride a little stiff for most people when they are not towing. For a similar support but a softer ride, I recommend the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-338-47 instead. In either case, I do recommend the SumoSprings Solo Custom Helper Springs - Front Axle...
view full answer... - Recommendation for Reducing Rock On 2016 Forest River Sunseeker Mercedes Chassis Leaving DrivewayI recommend adding the SumoSprings Solo Custom Helper Springs # SSR-338-47 to your 2016 Forest River Sunseeker on the Mercedes 3500 RV cutaway chassis. These are a progressive rate spring that will help to absorb the rocking when pulling out of the driveway. The Timbren Springs # TMBRSP35A are a much harder rubber spring and will lead to more shock/bounce than absorbing the the compression.
view full answer... - Recommended SumoSprings For A 2020 Jayco Melbourne 24LThe correct weight capacity SumoSprings system for your 2020 Jayco Melbourne will depend on how much support you are looking for. If you are not getting a lot of body roll and just need a little support, go for the 900 pound # SSR-338-47. On the other hand, if you are getting a lot of body roll and or sag and need a good amount of support, the # SSR-338-54 will be the better option. With that said, the 2020 Jayco Melbourne 24L weighs just over 11,000 pounds, so the lower capacity # SSR-338-47...
view full answer... - Recommended Rear Suspension Enhancement for 2016 Mercedes-Benz Sprinter MotorhomeFor your Coachman Motorhome with a 2016 Mercedes-Benz Sprinter 3500 Chassis, I recommend looking at the SumoSprings Solo Custom Helper Springs # SSR-338-47 for the rear axle. These 900 pound capacity springs will support a heavy load to level your ride and minimize sway. Although the units provide progressive load control, these are maintenance-free springs, which means you will not need to adjust or monitor them like you would with air springs. I have attached the installation details...
view full answer... - How Do Factory Bump Stops of 2016 Coachmen Prism 2150LE Remove to Install SumoSpringsTo see how the SumoSprings Solo Custom Helper Springs # SSR-338-47 would install you should check out the install video link I attached that covers the entire process on a similar RV that has the same chassis. The factory bump stops actually get pried out of the mounts they are in and there is no hardware to remove.
view full answer... - Best Suspension Enhancement For 2024 Mercedes-Benz Sprinter 3500The best option for suspension enhancement for your 2024 Mercedes-Benz Sprinter 3500 are SumoSprings: - SumoSprings Solo Custom Helper Springs - Front Axle # SSF-106-47 - SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-338-47 The SumoSprings offer the best support for your because they compress based on the amount of weight placed at the rear of your Sprinter. When you are towing, the SumoSprings will take the brunt of the weight put on your truck's rear suspension to counteract...
view full answer...
Do you have a question about this Vehicle Suspension?
Info for this part was:
Edited by:
Leah B
Video by:
Andrew K
Video by:
Dustin K
Video by:
John S
Installed by:
Jeff D
Installed by:
Robert C
Installed by:
Aidan B
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Chris R
Written by:
Mary K
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Alex H
Updated by:
Noah M
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Peter M.
10/5/2020
Review still stands as written one year ago!